Skip to main content
Skip table of contents

2.4 - VS [U6 Datasheet]

The VS terminals are designed as outputs for the internal supply voltage (nominally 5 volts).  This will be the voltage provided from the USB cable.  The VS connections are outputs, not inputs.  Do not connect a power source to VS in normal situations.  All VS terminals are the same.

Related specifications can be found in Appendix A.

For information about powering the U6 from a source other than USB, see the OEM information in Section 2.13.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.